• Comfort-Flex® shoulder holster system
• Made in the USA from premium full grain leather
• Features a specially contoured harness design
• 2 adjustable tension screws on the dual mag pouch
• NOTE: Not compatible with red dot optics

• Comfort-Flex® shoulder holster replacement
• Made in the USA from premium full grain leather
• Compatible with the 101 Comfort-Flex® shoulder holster system only
• Fits most popular guns for concealed carry
• NOTE: Not compatible with red dot optics

Replacement magazine pouch for the 101, 106, and 107 Shoulder Holster Rigs

• Comfort-Flex® shoulder strap replacement
• Made in the USA from premium top grain leather
• Includes Chicago screws and plastic keepers
• Compatible with the 101 Comfort-Flex®, 106 Comfort-Flex® Vertical, 107 FlatSider™ XR7, and 201 Comfort-Flex® Revolver Shoulder Holster systems

• Handcuff case attachment available for shoulder holsters or belt wear
• Constructed with premium cowhide and solid brass hardware
• Fits most standard chain handcuffs, including Smith & Wesson® Model 100 handcuffs and the Peerless® 700C and 730C
• Compatible with the 101 Comfort-Flex®, 106 Comfort-Flex® Vertical, 107 FlatSider™ XR7, and 201 Comfort-Flex® Revolver Shoulder Holster systems

• Magazine side leather tie-down attachment 
• Constructed with premium cowhide and solid brass hardware
• Compatible with the 101 Comfort-Flex®, 106 Comfort-Flex® Vertical, 107 FlatSider™ XR7, and 201 Comfort-Flex® Revolver Shoulder Holster systems

• Magazine side leather tie-down attachment 
• Constructed with premium cowhide and solid brass hardware
• Compatible with the 107 FlatSider™ XR7 Shoulder Holster system only

• Comfort-Flex® Vertical shoulder holster system
• Made in the USA from premium full grain leather
• Vertical shoulder holster component for large weapons
• Features a specially contoured harness design
• 2 adjustable tension screws on the dual mag pouch
• NOTE: Not compatible with red dot optics

• Comfort-Flex® Vertical shoulder holster replacement
• Made in the USA from premium full grain leather
• Compatible with the 106 Comfort-Flex® Vertical shoulder holster system only
• Fits most popular guns for concealed carry
• NOTE: Not compatible with red dot optics

• FlatSider™ shoulder holster system
• Made in the USA from premium full grain cowhide
• Features a specially contoured harness design
• 2 adjustable tension screws on the dual mag pouch
• NOTE: Not compatible with red dot optics

• FlatSider™ shoulder holster replacement
• Made in the USA from premium full grain leather
• Compatible with the 107 FlatSider™ XR7 shoulder holster system only
• Fits most popular guns for concealed carry
• NOTE: Not compatible with red dot optics

• Nightguard™ low ride duty holster for weapons with tactical lights and/or red dot sights
• Made in the USA from premium full grain leather cowhide and lined with suede
• Reinforced around the holster mouth for extra durability
• Level I retention with a thumb strap and tension screw
• Optics ready
• Designed for use with 2-1/4" duty belts
• Accommodates most red dot sights (see Notes for more info)

• Nightguard™ high ride duty holster for weapons with tactical lights and/or red dot sights
• Made in the USA from premium full grain leather cowhide and lined with suede
• Reinforced around the holster opening for extra durability
• Level I retention with thumb strap and adjustable tension screw
• Optics ready
• Designed for use with 2-1/4" duty belts
• Accommodates most red dot sights (see Notes for more info)

• Blue Line™ duty holster with drop loop
• Made in the USA with full grain leather and premium suede
• Features Level I retention with thumb break and tension screw
• Optics ready
• Designed for use with most 2-1/4" duty belts
• Accommodates most red dot sights (see Notes for more info)

• Blue Line™ high ride duty holster
• Made in the USA with full grain leather and lined with suede
• Features Level I retention using a thumb break and tension screw
• Optics ready
• Designed for use with 2-1/4" duty belts
• Accommodates most red dot sights (see Notes for more info)

• White Lightning™ belt slide multi fit gun holster
• Made in the USA from premium full grain cowhide and solid brass hardware
• Features a reinforced thumb break and contour molding to the weapon frame
• Slides onto gun belts up to 1-3/4"
• NOTE: Not compatible with red dot optics

• White Lightning™ open top belt slide multi-fit gun holster
• Made in the USA from premium leather cowhide and solid brass hardware
• Features a slim design for concealed carry
• Slides onto gun belts up to 1-3/4"
• NOTE: Not compatible with red dot optics

• White Lightning™ belt slide multi fit revolver holster
• Made in the USA from full grain leather and solid brass hardware
• Features a reinforced thumb break and hand molding to the revolver frame
• Slides onto dress or gun belts up to 1-3/4"
• NOTE: Not compatible with red dot optics

• The Spring Special™ features a strapless configuration with a sweat shield for those professionals who prefer open top carry.
• A reinforced top band around the holster mouth prevents the holster from collapsing and allows one-handed reholstering.
• Our extra strength "quick-on" spring clip features a hook configuration for maximum retention, which prevents the holster from being drawn with the gun.
• The Spring Special™ is made from top grain cowhide and molds to you and your weapon over time, creating a comfort unique to your body.
• It works great in the summer too!
• NOTE: Not compatible with red dot optics

• The Spring Special™ features a quick-release thumb break and a reinforced top band around the holster mouth. This prevents the holster from collapsing and allows one-handed reholstering.
• Our extra strength "quick-on" spring clip features a hook configuration for maximum retention, which prevents the holster from being drawn with the gun.
• The Spring Special™ is made from top grain cowhide and molds to you and your weapon over time, creating a comfort unique to your body.
• It works great in the summer too!
• NOTE: Not compatible with red dot optics

• The Bodyguard is a high riding holster that provides stability and protection for the gun.
• The full length of the weapon is custom molded and the barrel is fully covered and has a small opening at the bottom.
• It features a quick-release thumb break with a metal stiffener and solid brass hardware.
• The dual belt slots are made to accommodate belts up to 1-3/4" and holds the gun close to the body.
• NOTE: Not compatible with red dot optics

• The Bodyguard is a high riding holster that provides stability and protection for the gun.
• The full length of the weapon is custom molded and the barrel is fully covered and has a small opening at the bottom.
• It features a strapless configuration for those professionals who prefer this carry mode.
• The dual belt slots are made to accommodate belts up to 1-3/4" and holds the gun close to the body.
• NOTE: Not compatible with red dot optics

• NOTE: If you are ordering a holster for a Glock Generation 4 weapon, please keep in mind that we manufacture our holsters for the factory standard version without any of the back strap attachments. Contact our customer service for more information on holster fits for Glock Generation 4 weapons.

• The Bodyguard is a high riding holster that provides stability and protection for your revolver.
• The full length of the weapon is custom molded and the barrel is fully covered with a small opening at the bottom.
• It features a quick-release thumb break with a metal stiffener and solid brass hardware.
• The dual belt slots are made to accommodate belts up to 1-3/4" and holds the revolver close to the body.
• NOTE: Not compatible with red dot optics

• The Bodyguard is a high riding holster that provides stability and protection for your revolver.
• The full length of the weapon is custom molded and the barrel is fully covered with a small opening at the bottom.
• It features a strapless configuration for those professionals who prefer this carry mode.
• The dual belt slots are made to accommodate belts up to 1-3/4" and holds the revolver close to the body.
• NOTE: Not compatible with red dot optics

• Lightning Slide™ belt holster
• Made in the USA from premium cowhide and solid brass hardware
• Features an open top and contour molding
• Slides onto belts up to 1-3/4"
• NOTE: Not compatible with red dot optics

NOTE: Each 138 holster is molded to the frame of the weapon specified - example: the 138 made for the Glock 17 should also fit the 19, 22, 23, 26, 27 models and one made for the Colt 1911 Government model, should also fit the Commander and Officer size models.

• The APNDX™ is specifically designed to carry a snubby revolver forward of the hip bone on the strong side. This carry style, known as the appendix carry, gives a comfortable and discreet way to carry a small revolver.
• The holster is retained inside the waistband by a single hook spring clip on the forward edge of the holster.
• As the butt of the gun is pulled away from the clip and not straight up, the single clip gives excellent retention with enough flexibility for sitting comfort.
• When drawing from the APNDX™ holster, your shoulder does not rise, telegraphing the draw.
• The APNDX™ is crafted of premium cowhide with metal hardware. Weapon retention is accomplished by precise molding of the leather around the weapon.
• NOTE: Not compatible with red dot optics

NOTE: Not compatible with red dot optics

• Here's a popular design that carries the handgun comfortably and concealed - yet it's easy to remove or attach at the waistband!
• The "D.A." is uniquely styled to complement today's popular handguns. It's crafted from the finest leather and molded tightly to your handgun.
• Fitted to the holster, the trademark Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position.
• A thumb break strap built into the holster is backed up by an adjustable tension screw near the trigger guard.
• It features a full length SightStrip™ sight protection inside which allows for a smooth draw.
• Accommodates most red dot sights (see Notes for more info)

• Here's a popular design that carries the handgun comfortably and concealed - yet it's easy to remove or attach at the waistband!
• The "D.A." is uniquely styled to complement today's popular handguns. It's crafted from the finest leather and molded tightly to your handgun.
• Fitted to the holster, the trademark Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position.
• A strapless configuration built into the holster is backed up by an adjustable tension screw near the trigger guard.
• It features a full length SightStrip™ sight protection inside which allows for a smooth draw.
• Accommodates most red dot sights (see Notes for more info)

• Developed with the help of a major police department and tested by agencies around the world, the Nightguard™ XL takes the comfort and concealability of the original Nightguard™ into a pancake style holster.
• Slides onto belts up to 1-3/4" and creates a low profile by spreading the holster pocket along the curve of your hip. The holster mouth is reinforced with polymer and the strap is extra wide to prevent interfering with the trigger guard.
• Constructed from premium cowhide, the Nightguard™ XL rides high and close to the body, providing maximum comfort and concealment.
• Available for select weapon and light combinations.
• COMPATIBLE WITH MOST RED DOT SIGHTS

• Developed with the help of a major police department and tested by agencies around the world, the Nightguard™ XL takes the comfort and concealability of the original Nightguard™ into a pancake style holster.
• Slides onto belts up to 1-3/4" and creates a low profile by spreading the holster pocket along the curve of your hip. The holster mouth is reinforced with polymer and the strap is extra wide to prevent interfering with the trigger guard.
• Constructed from premium cowhide, the Nightguard™ XL rides high and close to the body, providing maximum comfort and concealment.
• Available for select weapon and light combinations.
• COMPATIBLE WITH MOST RED DOT SIGHTS

• Developed with the help of a major police department and tested by agencies around the world, the Nightguard™ Compact takes the comfort and concealability of the Nightguard™ XL pancake style holster and reduces the size to accommodate smaller weapon and light combinations.
• Slides onto belts up to 1-3/4" and creates a low profile by spreading the holster pocket along the curve of your hip. The holster mouth is reinforced with polymer and the strap is extra wide to prevent interfering with the trigger guard.
• Constructed from premium cowhide, the Nightguard™ Compact rides high and close to the body, providing maximum comfort and concealment.
• Available for select weapon and light combinations.
• Compatible with most red dot optics

• Developed with the help of a major police department and tested by agencies around the world, the Nightguard™ XL takes the comfort and concealability of the original Nightguard™ into a pancake style holster.
• Slides onto belts up to 1-3/4" and creates a low profile by spreading the holster pocket along the curve of your hip. The holster mouth is reinforced with polymer and the strap is extra wide to prevent interfering with the trigger guard.
• Constructed from premium cowhide, the Nightguard™ XL rides high and close to the body, providing maximum comfort and concealment.
• Available for select weapon and light combinations.
• COMPATIBLE WITH MOST RED DOT SIGHTS

• The Hideout Holster™ is designed for unobtrusive carry while wearing body armor.
• The holster attaches to dual vest straps up to 2" and carries like a vertical shoulder rig.
• Each holster is made from premium cowhide and is hand oiled and tanned to achieve the perfect color.
• NOTE: Not compatible with red dot optics

• The D.E.A. inside the waistband holster is a very comfortable way to conceal your favorite carry-gun.
• Made from heavy duty premium cowhide, the D.E.A.™ is contour molded to each individual weapon.
• The reinforced holster mouth allows one-handed reholstering and use of full length SightStrip™ protection insures a clean sight picture and smooth draw.
• Weapon retention is achieved by our unique molding process and a trigger guard tensioner.
• The belt loops securely fasten on to belts up to 1-3/4" with one-way snaps.
• NOTE: Not compatible with red dot optics

• The Yaqui Slide is a classic holster style with a very compact design that allows a proper firing grip from the holster and permits one-handed reholstering.
• The holster is made of premium cowhide and features an open muzzle for accommodating various barrel lengths of the same model sidearm.
• Included are two tensioner screws and grommets for perfect fit, adjusted to your preference.
• A 1-3/4" belt tunnel is cut out in the rear for placing the holster over a trouser belt loop which prevents the holster from shifting.
• Accommodates most red dot sights (see Notes for more info)

• The Pocket Protector Express™ solves the problem of pocket pistol "printing," without compromising access to the gun, by attaching a wallet shaped flap of leather to the leading edge of the holster. This allows a full firing grip from the leather and assures the holster will stay in the pocket when drawing.
• Our new ambidextrous design allows right or left hand carry using hook and loop fastener, and the flap can be removed completely for jacket pocket carry or special applications.
• The holster also assures the gun butt is properly positioned for drawing and protects one's pocket lining.
• Furnished in black, rough out. Don't leave home without it!
• The Pocket Protector Express™ has been featured in many gun magazine publications.
• NOTE: Not compatible with red dot optics

• Our Comfort-Flex® PRO ankle holster provides un-paralleled comfort and security for "2nd Gun" backup.
• Constructed of ventilated surgical grade elastic and top grain cowhide, the gun hugs the ankle closely for maximum concealment, with just enough give for comfort.
• It's lightweight design gives the wearer increased mobility thanks to the softer elastic edge.
• Thick, genuine sheepskin, not synthetic "cheapskin", wicks perspiration away from the ankle and prevents slippage.
• The holster secures to the ankle with a hi-grade hook and loop closure.
• The version for semi autos features a metal reinforced thumb-break while revolvers use a "pull-through" retention system.
• NOTE: Not compatible with red dot optics

• The Spring Special™ Executive features a polymer reinforced band around the holster mouth which prevents the holster from collapsing in one's waistband which allows for one-handed re-holstering.
• The extra strength "quick-on" spring clip features a hook configuration for positive retention, which prevents the holster from being drawn along with the gun.
• Constructed of the finest cowhide, and featuring thumb break retention, the Spring Special™ Executive is precisely molded to the individual weapon.
• NOTE: Not compatible with red dot optics

• The Spring Special™ Executive features a polymer reinforced band around the holster mouth which prevents the holster from collapsing in one's waistband which allows for one-handed re-holstering.
• The extra strength "quick-on" spring clip features a hook configuration for positive retention, which prevents the holster from being drawn along with the gun.
• Constructed of the finest cowhide, and featuring a strapless design, the Spring Special™ Executive is precisely molded to the individual weapon.
• NOTE: Not compatible with red dot optics

• What can we say about this holster, except that it has ranked high in popularity among professional gun carriers since Roy Baker cooked up the first one many years ago.
• Constructed from premium steer hide, the "Classic" is precisely molded to the individual weapon, and provides uncompromising comfort and concealment.
• Featuring thumb break retention, the three slot design allows the holster to be worn crossdraw or in the F.B.I. forward rake carry.
• The holster also features a trigger guard tension screw for extra security.
• NOTE: Not compatible with red dot optics

• What can we say about this holster, except that it has ranked high in popularity among professional gun carriers since Roy Baker cooked up the first one many years ago.
• Constructed from premium steer hide, the "Classic" is precisely molded to the individual weapon, and provides uncompromising comfort and concealment.
• Featuring a strapless design, the three slot design allows the holster to be worn crossdraw or in the F.B.I. forward rake carry.
• The holster also features a trigger guard tension screw for extra security.
• NOTE: Not compatible with red dot optics.

• NOTE: If you are ordering a holster for a Glock Generation 4 weapon, please keep in mind that we manufacture our holsters for the factory standard version without any of the back strap attachments. Contact our customer service for more information on holster fits for Glock Generation 4 weapons.

• The Nightguard™ was the first holster to offer a true concealment option for weapons with tactical lights and is the first choice for many federal agencies and off duty officers.
• Constructed from premium cowhide, the Nightguard™ rides high and close to the body, providing maximum comfort and concealment.
• It slides on to belts up to 1-3/4" with a rear belt slot and specially designed anchor.
• The light attachment is fully enclosed to avoid any scratching or wear on the lens.
• It also features a reinforced opening for additional durability and a tension screw to adjust the tension to your preference.
• Accommodates most red dot sights (see Notes for more info)

• The Nightguard™ Open Top Holster is the strapless variation of the first holster to offer a true concealment option for weapons with tactical lights and is the first choice for many federal agencies and off duty officers. 
• Constructed from premium cowhide, the Nightguard™ rides high and close to the body, providing maximum comfort and concealment.
• It slides on to belts up to 1-3/4" with a rear belt slot and specially designed anchor.
• The light attachment is fully enclosed to avoid any scratching or wear on the lens.
• It also features a reinforced opening for additional durability and a tension screw to adjust the tension to your preference.
• Accommodates most red dot sights (see Notes for more info)

• Our FlatSider XR12 is the perfect off-duty leather holster for concealed carry when style and all-day comfort are as important as concealment
• With a mid-ride and FBI forward cant, this leather gun holster model sits comfortably over the hip while allowing a natural draw
• Features a Level I retention strap and adjustable tension screw to adjust the ease of your draw
• Molded belt slots slide easily onto belts up to 1-3/4"
• NOTE: Not compatible with red dot optics

• Our 168A FlatSider XR13 off-duty leather holster provides easy access to your firearm with an open top design for a quick, and smooth draw
• With a mid-ride and FBI forward cant, this leather holster model sits comfortably over the hip while allowing a natural draw
• Features a sweat shield for protection and adjustable tension screw to adjust the ease of your draw
• Molded belt slots slide easily onto belts up to 1-3/4"
• NOTE: Not compatible with red dot optics

• We prevailed on designer Richard Nichols to put his name on this one - and what a holster it is - a fresh interpretation of the trailing holster he helped popularize.
• On the Nichols Avenger™, a dual-plane open muzzle suits both standard and shortened barrels and the double reinforced holster mouth has adjustable tension at one end and a double-thick belt slot at the other.
• An integral belt loop on the back cooperates with the outboard belt slot for stability and concealability.
• A full time strapless design is made for the professional with "the need for speed!"
• NOTE: Not compatible with red dot optics

• NOTE: If you are ordering a holster for a Glock Generation 4 weapon, please keep in mind that we manufacture our holsters for the factory standard version without any of the back strap attachments. Contact our customer service for more information on holster fits for Glock Generation 4 weapons.

• Our approach to this popular holster genre is extra comfortable because it's flat on one side!
• Using our special method, the FlatSider™ XR14 is molded in fine leather to fit one's handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature.
• At either side of the holster pocket are curved belt slots that cooperate to provide stability on the belt with unparalleled concealment.
• The thumb break configuration is backed up by an adjustable tension screw that does double duty as a trigger guard stop.
• Inside the holster is a full-length molded sight channel and the special dual-plane muzzle is suited to both standard and shortened barrels.
• The XR14 features a quick-draw vertical configuration for those who prefer this carry mode.
• Accommodates most red dot sights (see Notes for more info)

• Our approach to this popular holster genre is extra comfortable because it's flat on one side!
• Using our special method, the FlatSider™ XR15 is molded in fine leather to fit one's handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature.
• At either side of the holster pocket are curved belt slots that cooperate to provide stability on the belt with unparalleled concealment.
• The strapless design is backed up by an adjustable tension screw that does double duty as a trigger guard stop.
• Inside the holster is a full-length molded sight channel and the special dual-plane muzzle is suited to both standard and shortened barrels.
• The XR15 features a quick-draw vertical configuration for those who prefer this carry mode.
• Accommodates most red dot sights (see Notes for more info)

• Named for the Bruce Nelson design, the FlatSider™ Statesman XR20 fills a very important niche.
• The belt loops on each end of the hoster wrap solidly around the belt and secure with heavy-duty, one-way snaps. This allows those who favor a slide-on holster the quick-on, quick-off convenience of a paddle rig, by simply snapping it on or off without removing the waistbelt.
• By featuring the same trigger guard tensioner and precision molding as our other Flatsider holsters, we again offer the user maximum speed and security.
• The XR20 is a must have holster for detectives or off-duty use!
• NOTE: Not compatible with red dot optics

• Named for the Bruce Nelson design, the FlatSider™ Statesman XR21 fills a very important niche.
• The belt loops on each end of the hoster wrap solidly around the belt and secure with heavy-duty, one-way snaps. This allows those who favor a slide-on holster the quick-on, quick-off convenience of a paddle rig, by simply snapping it on or off without removing the waistbelt.
• By featuring the same trigger guard tensioner and precision molding as our other Flatsider holsters, we again offer the user maximum speed and security.
• It features a strapless configuration for those who prefer this carry mode.
• The XR21 is a must have holster for detectives or off-duty use!
• NOTE: Not compatible with red dot optics

• The IWB Statesman™ holster is our most comfortable option for inside-the-waistband concealed carry.
• The reinforced holster mouth allows for one-handed reholstering and weapon retention is achieved by our unique molding process.
• Two belt loops are attached by Chicago screws and securely fastens the holster on to belts with up to 1-3/4" widths with solid brass one-way snaps.
• NOTE: Not compatible with red dot optics

• The Hugger XL™ is a very trim and comfortable holster that gives full barrel coverage (see note) with minimum bulk.
• The rear face of the holster is virtually flat for superior comfort, and the low-cut front allows you to fetch your weapon very quickly.
• Aker's precision molding and superior finish make this one of the sleekest holsters you'll ever own.
• Accommodates most red dot sights (see Notes for more info)

• Comfort-Flex® shoulder holster system, designed for revolvers
• Made in the USA from premium full grain leather
• Features a specially contoured harness design
• Adjustable tension screws on the shoulder straps fit chest sizes up to 62"
• NOTE: Not compatible with red dot optics

NOTE: Each 201 holster is molded to the frame of the revolver specified rather than the barrel length.

• Comfort-Flex® revolver shoulder holster replacement
• Made in the USA from premium full grain leather
• Compatible with the 201 Comfort-Flex® Revolver shoulder holster rig only
• Fits most popular revovlers for concealed carry
• NOTE: Not compatible with red dot optics

Speedloader case replacement for the 201 Comfort-Flex Shoulder Rig

• Here's a popular design that carries the handgun comfortably and concealed - yet it's easy to remove or attach at the waistband!
• The "D.A." is uniquely styled to complement today's popular revolvers. It's crafted from the finest leather and molded tightly to your revolver.
• Fitted to the holster, the trademark Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position.
• A thumb break strap built into the holster is backed up by an adjustable tension screw near the trigger guard.
• It features a full length SightStrip™ sight protection inside which allows for a smooth draw.
• NOTE: Not compatible with red dot optics

• Here's a popular design that carries the handgun comfortably and concealed - yet it's easy to remove or attach at the waistband!
• The "D.A." is uniquely styled to complement today's popular revolver. It's crafted from the finest leather and molded tightly to your revolver.
• Fitted to the holster, the trademark Air-Flo™ paddle incorporates dual retention barbs to hold the holster in position.
• A strapless configuration built into the holster is backed up by an adjustable tension screw near the trigger guard.
• It features a full length SightStrip™ sight protection inside which allows for a smooth draw.
• NOTE: Not compatible with red dot optics

• NOTE: If you are ordering a holster for a Glock Generation 4 weapon, please keep in mind that we manufacture our holsters for the factory standard version without any of the back strap attachments. Contact our customer service for more information on holster fits for Glock Generation 4 weapons.

• The D.E.A. inside the waistband holster is a very comfortable way to conceal your favorite revolver.
• Made from heavy duty premium cowhide, the D.E.A.™ is contour molded to each individual weapon.
• The reinforced holster mouth allows one-handed reholstering and use of full length SightStrip™ protection insures a clean sight picture and smooth draw.
• Weapon retention is achieved by our unique molding process and a trigger guard tensioner.
• The belt loops securely fasten on to belts up to 1-3/4" with one-way snaps.
• NOTE: Not compatible with red dot optics

• The Nightguard™ was the first holster to offer a true concealment option for weapons with tactical lights and is the first choice for many federal agencies and off duty officers.
• Constructed from premium cowhide, the Nightguard™ rides high and close to the body, providing maximum comfort and concealment.
• For those who need the quick-on, quick-off features of a paddle rig when going into restricted areas, interrogation rooms, etc., this holster gives all the features of the slide-on model, plus the convenience and stability of our new Air-Flo™ paddle.
• The light attachment is fully enclosed to avoid any scratching or wear on the lens.
• It also features a reinforced opening for additional durability and a tension screw to adjust the tension to your preference.
• Accommodates most red dot sights (see Notes for more info)

The Nightguard™ Open Top Holster is the strapless variation of the first holster to offer a true concealment option for weapons with tactical lights and is the first choice for many federal agencies and off duty officers.

• Constructed from premium cowhide, the Nightguard™ rides high and close to the body, providing maximum comfort and concealment.

• It attaches securely onto belts up to 1-3/4" with our Air-Flo™ Paddle.

• The light attachment is fully enclosed to avoid any scratching or wear on the lens.

• It also features a reinforced opening for additional durability and a tension screw to adjust the tension to your preference.

• Accommodates most red dot sights (see Notes for more info)

• Our approach to this popular holster genre is extra comfortable because it's flat on one side!
• Using our special method, the FlatSider™ Paddle XR17 is molded in fine leather to fit one's handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature.
• All the performance features of the XR12 but now with a paddle back for easy removal from the waistband area. The Air-Flo™ Paddle incorporates dual retention barbs to help hold the holster in position for maximum concealment.
• The thumb break configuration is backed up by an adjustable tension screw that does double duty as a trigger guard stop.
• Inside the holster is a full-length molded sight channel and the special dual-plane muzzle is suited to both standard and shortened barrels.
• NOTE: Not compatible with red dot optics

• Our approach to this popular holster genre is extra comfortable because it's flat on one side!
• Using our special method, the FlatSider™ Paddle XR19 is molded in fine leather to fit one's handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature.
• All the performance features of the XR17 but now with a paddle back for easy removal from the waistband area. The Air-Flo™ Paddle incorporates dual retention barbs to help hold the holster in position for maximum concealment.
• The strapless design is backed up by an adjustable tension screw that does double duty as a trigger guard stop.
• Inside the holster is a full-length molded sight channel and the special dual-plane muzzle is suited to both standard and shortened barrels.
• NOTE: Not compatible with red dot optics

• Bikini style handcuff case
• Made in the USA from full grain leather
• Fits one pair of chain handcuffs
• Clips onto belts up to 1-3/4"

• Bikini style handcuff case
• Made in the USA from full grain leather
• Fits one pair of ASP handcuffs
• Clips onto belts up to 1-3/4"

• Single magazine pouch
• Made in the USA from premium cowhide and solid brass hardware
• Fits 1 standard magazine
• Slides onto belts up to 1-3/4"

• Single magazine pouch
• Made in the USA from premium cowhide
• Fits 1 standard magazine
• Clips onto belts up to 1-3/4"

• Single magazine pouch
• Made in the USA from premium cowhide
• Fits 1 standard compact magazine
• Clips onto belts up to 1-3/4"

• Single magazine pouch
• Made in the USA from premium cowhide
• Fits 1 standard magazine
• Snaps onto belts up to 1-3/4"

• D.M.S.™ Night Fighter™ magazine and flashlight pouch
• Made in the USA from premium cowhide and solid brass hardware
• Fits 1 spare magazine and 1 flashlight
• Features a paddle and belt slot for belts up to 1-3/4"

Please see notes for information regarding draw hand!

• D.M.S.™ Combo™ handcuff and magazine pouch
• Made in the USA from premium cowhide and solid brass hardware
• Fits 1 standard chain handcuffs and 1 spare magazine
• Features a paddle and belt slot for belts up to 1-3/4"

Please see notes for information regarding draw hand!

• D.M.S.™ Combo™ ASP handcuff and magazine pouch
• Made in the USA from premium cowhide and solid brass hardware
• Fits 1 standard ASP chain handcuffs and 1 spare magazine
• Features a paddle and belt slot for belts up to 1-3/4"
• NOTE: Not compatible with ASP ULTRA Cuffs

Please see notes for information regarding draw hand!

• D.M.S.™ Twin™ open top double magazine pouch
• Made in the USA from premium cowhide and solid brass hardware
• Fits 2 spare magazines
• Features a paddle and belt slot for belts up to 1-3/4"

• Clip-on badge holder for Federal badge.
• Features a black clip for a low profile inside the waist band carrier.
• Clips onto belts up to 1-3/4".
• Made with premium cowhide and solid brass snaps.

Note: Product does not come with badge included. 

• Clip-on badge holder for Shield badge.
• Features a black clip for a low profile inside the waist band carrier.
• Clips onto belts up to 1-3/4".
• Made with premium cowhide and solid brass snaps.

Note: Product does not come with badge included. 

• Clip-on badge holder for Star badge.
• Features a black clip for a low profile inside the waist band carrier.
• Clips onto belts up to 1-3/4".
• Made with premium cowhide and solid brass snaps.

Note: Product does not come with badge included. 

• Reversible undercover badge and ID holder.
• Designed to be worn around the neck.
• Fits all style badges.
• Comes standard with a heavy duty beaded chain.
• Made with premium cowhide.

Note: Product does not come with badge included. 

• Undercover necklace badge holder offers concealment with quick access to your badge.
• Incorporates a back clip for belts up to 1-3/4" and a chain for all types of carry.
• Features a flush mount for bag protection.
• Made with premium cowhide.

Note: Product does not come with badge included. 

• Bikini style handcuff case made with premium cowhide and solid brass snaps.
• Fits hinged handcuffs.
• Clips on to belts up to 1-3/4" with a slim metal clip

• The D.M.S.™ Single Handcuff Case with pull through release snap.
• Fits standard chain handcuffs.
• Comes standard with a quick on/quick off paddle unit.
• Remove the paddle and there is a belt loop that slides onto belts up to 1-3/4"
• Constructed with premium cowhide and solid brass hardware.

• The 607A is the same as the 607, but made to hold ASP cuffs.
• Constructed from premium U.S. cowhide, this product is handcrafted at our factory in California.
• Features a removable paddle, and once removed, has belt slots open to 1-3/4".

• The D.M.S.™ Single Hinged Handcuff Case with pull through release snap.
• Fits standard hinged handcuffs.
• Comes standard with a quick on/quick off paddle unit.
• Remove the paddle and there is a belt loop that slides onto belts up to 1-3/4"
• Constructed with premium cowhide and solid brass hardware.

• This dual magazine carrier uses two adjustable retention screws for security, and has two snap-fastening belt loops to allow positioning over a pants belt loop.
• Available for most popular magazines.
• Constructed from U.S. premium cowhide and handcrafted at our factory in California. 

• The D.M.S.™ Combo pouch accommodates one spare magazine and mace canister.
• Fits standard 2 oz. mace canisters.
• Features 2 adjustable tension screws.
• Comes standard with a quick on/quick off Air-Flo paddle unit.
• Remove the paddle and there is a belt loop that slides onto belts up to 1-3/4"
• Constructed with premium cowhide and solid brass hardware.

Please see notes for information regarding draw hand!

This case conveniently combines a SureFire 6P or Streamlight Scorpion/Strion flashlight and handcuffs in an optional quick on/quick off paddle unit. Specify either right or left hand carry.

• The D.M.S.™ Combo Light/Cuff Case accommodates a flashlight and handcuffs.
• Fits SureFire 6P/Streamlight Scorpion or Streamlight Scorpion/Strion flashlights (see Notes)
• Features 2 adjustable tension screws.
• Comes standard with a quick on/quick off Air-Flo paddle unit.
• Remove the paddle and there is a belt loop that slides onto belts up to 1-3/4"
• Constructed with premium cowhide and solid brass hardware.

Please see notes for information regarding draw hand!

• The D.M.S.™ Combo pouch accommodates handcuffs and one mace canister.
• Fits standard chain or hinged handcuffs and 2 oz. mace canisters.
• Features 1 adjustable tension screws.
• Comes standard with a quick on/quick off Air-Flo paddle unit.
• Remove the paddle and there is a belt loop that slides onto belts up to 1-3/4"
• Constructed with premium cowhide and solid brass hardware.

Please see notes for information regaring draw hand!

• Recessed badge holder for Federal badge.
• Incorporates a back clip for belts up to 1-3/4" Velcro® closure, and a chain for all types of carry.
• Made with premium cowhide.

Note: Product does not come with badge included. 

• Recessed badge holder for Shield badge.
• Incorporates a back clip for belts up to 1-3/4" Velcro® closure, and a chain for all types of carry.
• Made with premium cowhide.

Note: Product does not come with badge included. 

• The 1-3/4" Ranger Belt features 3/4" billets.
• Made of high quality heavy duty cowhide for durability.
• Features solid brass hardware.

• The 1-1/2" Ranger Belt features 3/4" billets.
• Made of high quality heavy duty cowhide for durability.
• Features solid brass hardware.

• Classic and dressy 1-3/4" belt.
• Constructed from heavy saddle leather and is leather lined to give your gun adequate support.
• Features solid brass hardware and comes standard with one leather keeper. 

Available in 1 3/4" width.

• Classic and dressy 1-1/2" belt.
• Constructed from heavy saddle leather and is leather lined to give your gun adequate support.
• Features solid brass hardware and comes standard with one leather keeper. 

Available in 1 3/4" width.

• Fancy Stitch 1-3/4" Belt.
• Constructed from heavy saddle leather and is leather lined to give your gun adequate support.
• Features the distinctive "gunfighter" stitching pattern and solid brass hardware.
• The first choice for the United States Navy.

• Fancy Stitch 1-1/2" Belt.
• Constructed from heavy saddle leather and is leather lined to give your gun adequate support.
• Features the distinctive "gunfighter" stitching pattern and solid brass hardware.

• Any holster, whether kydex, nylon or leather, requires a high quality, supportive gun belt.
• The 1-1/2" Concealed Carry Gun Belt™ has all the features of a premium dress belt, and includes a reinforcing strip of polymer to prevent weapon rollover or sagging.
• Full leather lining, feathered edges, and a custom solid brass buckle and keeper make this leather belt stand out from the competition.
• Finally, a concealment belt that doesn't look like a gun belt! It gives you good back support too!

Note: OUR BELTS ARE MEASURED BY INCHES, NOT BY PANT SIZE. PLEASE VISIT OUT FAQ FOR INFORMATION ON HOW TO PROPERLY SIZE YOUR AKER BELT.

• Any holster, whether kydex, nylon or leather, requires a high quality, supportive gun belt.
• The 1-1/4" Concealed Carry Gun Belt™ has all the features of a premium dress belt, and includes a reinforcing strip of polymer to prevent weapon rollover or sagging.
• Full leather lining, feathered edges, and a custom solid brass buckle and keeper make this leather belt stand out from the competition.
• Finally, a concealment belt that doesn't look like a gun belt! It gives you good back support too!

NOTE: OUR BELTS ARE MEASURED BY INCHES, NOT BY PANT SIZE. PLEASE VISIT OUR FAQ FOR INFORMATION ON HOW TO PROPERLY SIZE YOUR AKER BELT.

Crafted from genuine sharkskin and high grade cowhide to last a lifetime, we have taken our 168A FlatSider XR13 and elevated it to the next level of craftsmanship and quality.

• Our approach to this popular holster genre is extra comfortable because it's flat on one side!
• Using our special method, the FlatSider XR13 is molded in fine leather to fit one's handgun with 100% of the holster pocket formed away from the body. No other holster can boast of this feature.
• At either side of the holster pocket are curved belt slots that cooperate to provide stability on the belt with unparalleled concealment.
• The strapless design is backed up by an adjustable tension screw that does double duty as a trigger guard stop.
• Inside the holster is a full-length molded sight channel and the special dual-plane muzzle is suited to both standard and shortened barrels.
• NOTE: Not compatible with red dot optics

NOTE: Each Black Label™ product is custom made and may take up to 60 days for production.

Crafted from genuine sharkskin and high grade cowhide to last a lifetime, this dual magazine carrier uses two retention screws for security, and has two snap-fastening belt loops to allow positioning over a pants belt loop. Available in black only.

Note: Each Black Label™ product is custom made may take up to 60 days for production.

Crafted from genuine sharkskin and lined with high grade cowhide, this 1-1/2” belt features feathered edges and a custom solid brass buckle and keeper. The secondary feature is a reinforcing strip of heavy duty polymer to prevent weapon "rollover" or sagging. Finally, a distinctive gun belt to last a lifetime! Available in black only.

Note: Each Black Label™ product is custom made may take up to 60 days for production.

• The Air-Flo™ Paddle incorporates dual retention barbs to help hold your holster or accessory in position for maximum concealment.
• Replacement paddle for 144, 268, 268A, 519, 619, etc.

• Standard quick on/quick off paddle unit with dual retention barbs.
• Replacement paddle for 517, 607, etc.